Khador Kodiak.

I painted one about 5 years ago, when I had first started Warmachine. I hadn't ever picked up an airbrush at at point and it was a used model that looked like someone had put together with some sort of two part epoxy.

Here is what it looked like when I was finished with it. At the time I hadn't figured out highlights, shading etc. It was all base coat, heavy wash, varnish and done.

Let's fast forward to today. I picked up another Kodiak as I really like the model and wanted to try again. Some people like to strip and repaint models. Personally I like to keep them as a reminder of how far (or sometimes not) I have come with my painting.

Here is the Kodiak I have been working on this week. The paint job is done. I have to work on a base for it and I think I am going to enter it into the P3 competition at Warmachine Weekend this year. Now I just have to learn and execute a display base worthy of the model.

Making a Tournament Tray.

I am heading to Warmachine Weekend in November. It is my first Con, and I am about as excited as a seven year old on Christmas Eve. That being said. I am getting everything together and ready to go. I have about 65 models that still need to be painted. Tokens to get, a bag to carry everything in etc., and trying to save a bit of money is a must. I need a tournament tray and sadly the ones that would fit my armies would run in the $125- $150 range. Stores like Broken Egg Games has amazing trays but I honestly can't justify the cost. So I set out to see if I could do it myself, and still have a high quality tray.

I started where all married men do, by asking my wife. She is a graphic designer and she helped (well made the whole thing really amazing) by laying out a template for slot spacing. I picked up a piece of scrap wood from Ace Hardware for $7. I got a 17"x 21" composite MDF board that had an actual grain on it. My wife then printed out the stencils and marked the board for drilling.

In the picture you can see how the original thought was to have all the model slots around a large middle rectangle that had a card holder in the middle. 

Cutting out the slots was done on a drill press with, 31mm, 41mm and 52mm router bits. Surprisingly there was not too much splintering on the wood during drilling. 

Instead of drilling the center storage of the board I found it made more sense to create a little box. I took a 36" piece of pine cut it to length and used wood glue to secure it to the board.

Then it was time to sand, and sand, and sand..... each individual hole needed to be sanded smooth.

I also rounded the corners a bit as sharp corners not only hurt, but they can chip and splinter.

After sanding and all that work, I realized that I had missed two 50mm slots that I needed. I had to knock out some of the middle box. I decided not to remove the sides and shorten them as removing just the one smaller piece of pine caused a bit of damage that took about 20 minutes of sanding to fix.


Then it was off to the paint shop. I used a black enamel paint that seals and protects the wood. It required a few coats and about 6 hours to cure.

But now I have a tournament tray ready for use that will last for years. The best part? It cost a total of $12 (not including time) and the project took about 10 hours (including my wife's design time) from start to finish.

Khador Berserker - Finished.

This was a quick project, and a good pallet cleanser. Now onto units of army mans, cuz nothing says fun like painting 10 man squads....

Have some pics for your trouble.

Khador Berserker 1.0

This is a really old model. I think it might even have been one of the original releases from Privateer Press back in the old days of Warmachine Mark I.

That being said, its still made out of white metal. It is  2lbs of awesomeness. I started with the usual as in priming with a medium grey. I left the primer to cure over night. Then it was time for the undercoats. I have shown this before, I start with Vallejo Model Color Black/Grey, then add Vallejo Game Color Stone Grey for the highlights. Once dry I use FW Red ink to give it a good dark base of red. Then its on to the second highlights. I used Vallejo Model Color Bright Flesh and it was off to the second red ink this time using P3 Red Ink.

On to the details. I went back over some surfaces with VMC Black Grey (on the shoulder pads etc.), added P3 Pig Iron for the base silvers and VAM Old Gold and VMC Brass.

So here is where we are now. Just the highlights and cleanup is left to do. Not bad for about 6 hours on a Sunday.

Old Witch Finished.

This model was a fantastic pallet cleanser. I needed something fun a quick to paint up.
The color choices are pretty simple on this one. I also went pretty dark as she is supposed be some kind of hiding in the woods, communing with nature, and killing you when she has to witch.

I would normally give ya'll a color list but I honestly didn't even pay attention, I just grabbed what looked good and went with it.

I hope you like her. I also think I am getting much better at the camera/editing thing.

My long absence has come to an end.

Sorry about not posting up anything in about a month. Life has gotten in the way of art and fun. The good news is that I am back and have been working on models.

Currently I have a few on the table but this is the closest I have to finished right now.

This the PP Khador Old Witch. She comes with a warjack and I'll post up pics of that when I get finished with him.

This is a work in progress, You can see that I have started on the shading and highlights. I really need to figure out what color her dress is going to be. I usually "know" but am kinda lost on this one.


So have a few pics and we will talk again soon.

Ruin Finished.

Well here is another one in the display case. What a fun model to work on. I really love how it looms over the base. On that note this will not be the last time I look to Armorcast for great basing ideas. I just hope they add a few more styles to what they already have.

I think I might be getting the hang of the whole photo editing thing too. I shot the pics in RAW which while they are something like 18mb per pic it makes working with upping the light and contrast etc really easy without losing detail.

Well that's it for now. Stay tuned.... I have an exciting product review coming up in the next few days.