Showing posts with label Hairspray. Show all posts
Showing posts with label Hairspray. Show all posts

Saturday, August 5, 2017

Nemo 5.0

Well It was more work time on the Nemo bust. I continued to work on the skin, more and more glazing to get the shading and highlighting right. I'm happy with where the skin tone is now. I tried something different and funky with the eyes on this one. I went all "Storm" and tried to get a glow from the eyes, like there was some kind of magic happening. I'm not sure if I like it or not, so we shall see if it stays of if I blow it out and redo it normally.

Other than that, highlights were added to the golds, the purple and the silvers. a bit of wash was applied strategically on the armor. and well here are the pics.




Thursday, July 6, 2017

Nemo update 1.

Well this guy is coming along nicely. I decided that the end goal is going to look as though Nemo has seen some better days. With that in mind I started out with a rust under coat. I'll be using the hair spray technique on this one. I feel that it gives a real feel with depth to the rust and pitting in the armor.





Here you can see that I started with a base brown and worked up different spots to almost an orange. It's important to vary the colors of your browns as it is both visually stimulating and mimics what rust actually looks like.

Next up was a heavy layer of gloss varnish. This is important. It needs to be heavy to protect the rust layer for whats to come down the road.

After the varnish had time to cure (about 8 hours) It was time to coat the model in hair spray. As I've said time and again, you must use the cheap stuff. Aqua Net all the way. Don't go and steal your significant others (or even your own) fancy smells good stuff. We need the cheap stuff that almost instantly activates when wet.

I let the hairspray dry overnight. While it does not require anywhere near that long to dry I was tires and hit the sack.

Next up it was time to base coat. The standard paint job for this sculpt and pretty much all Cygnar is blue..... I am not going blue. It's just boring to me. I wanted an almost yellowish green look for this one and started with a nice base coat. One thing to keep in mind is that the hairspray will activate with water. So when working over it you must keep moving your airbrush and build up the layers slowly. This takes time but it is worth it. With the base coat laid down It was time to apply the highlights. I basically took my base coat and added white till I was happy that there would be enough contrast and even help bring out a bit of shadow.





And not it's time to let everything dry. Next up will be paint chipping and weathering around the rust. 



Sunday, July 31, 2016

Don't leave your War Jack out in the snow.

I'm not the biggest fan of seeing a whole army full of weathered, chipped, and beaten up equipment. Real armies in the real world meticulously maintain their weapons (else they stop working). That being said, we paint and play with toys and whimsy so it's all good to have something all beaten down by time.

Taking that into account I wanted to do something completely different from what I have been working on (manly crisp, clean models that look almost showroom new).

I started out by priming the model in grey, then used a dark brown to base my rust, then added more brown reds and finally orange in certain spots to add variety of color like you would see in the real world.

Once done with that step a HEAVY gloss coat was added. This is needed to protect the rust layer so that it does not get stripped off in later steps.

After the gloss coat was fully cured (about 24 hours). I then coated the model with hair spray. Now a word of caution, do not use your wife's fancy expensive hair spray. First the stuff won't react with the water later, and it's almost guaranteed to start an argument.....Go out and grab a bottle of Aqua Net from the dollar store of your choice.

The hairspray only takes about an hour to set. We then proceed to paint the base color onto the model with an airbrush. this requires very light coats of paint at a lower psi as you want to avoid the water in the paint from activating the hair spray.

After all that works it's then time to ruin a perfectly good paint job. I start by taking a paint brush and loading it with water, then basically "paint the mini" with water in a small section, wait a few seconds for the water to activate the hairspray and then use a tooth brush to chip off the paint. When the desired effect is reached take a dry paper towel and dab the part of the model clean. Then move on to the next piece etc till done.

Once the chipping is finished it's time to protect what is already done. I find another heavy coat of gloss varnish to work really well here and it sets up the next step in the process. The wash.... Personally I like to use an oil was for this effect. not only does it flow into the recess better but you can achieve really nice rust streaks with it as well.

After a few hours of the oil drying I then use weathering powder to further diminish the fresh look of the paint. The not quite dry oil wash helps the pigments adhere to the model.

After that a good matte varnish and then you just finish off the details...

See clear as mud right?

So here is the result of all that text.











Wednesday, July 27, 2016

Devastator Part 1.0

It's time to bust out ye olde rusting again. It's been a good long while and I figured why not give my self a challenge and go with a good dirty rusted out warjack. Not only good and rusty but lets assume that it was white at some point in it's carrier.

The devastator just seemed to fit the bill. It has good flat vertical lines and nice slopes to make run off and rust streaks look good.

So far i have gotten the basic rust chipping added. In my next post you will see the real magic....

so have a little taste.






Sunday, February 21, 2016

GW Rhino 3.0

Wow, I can't believe it's been over a week since I have been able to post any work updates. Darn life has been getting in the way of painting time.....

Thank goodness I was able to get a few hours in tonight! In picking up where I left off. I finished up the slivers on the tank treads and all the fiddly bits, and tried a new technique on the smoke stacks. I was looking at pictures of exhaust pipes and thought about how they typically go from silver to gold to blue I wanted to give it shot on the model. I already had the base gold laid down, so I took a new paint in my collection P3 - Blighted Gold and used it as a transition to the top of the stacks. Then I mixed a blue and black acrylic was together for the uppermost part and I really like how it turned out. Then it was time to add a bit more weathering to the model. The first step is the oil wash. I used W&N Red Ocher and applied it liberally to the model. Once this is dry it will be time to go with a good rust colored weathering powder and this one will be in the books.

So here is a bad picture of the progress so far.

Friday, April 10, 2015

Contest Model 6.0 - And Finished!

Rocinante is done and in the display case. This was a really fun model to work on. I love how PP Warjacks have largish but not overly so areas to work on. Just enough room to give good detail and do a few fun things with.

So where did we leave off.... Well after the gloss coat had time to dry. I was able to mix up a black oil wash and all the Silvers and golds were given a heavy wash to bring down the shine dramatically. Then I mixed an orange wash to add to the rust effect.

Once dried I applied some Secret Weapons Miniatures rust pigments across most of the model. It adds a bit of depth and also brings down the shine. I like doing this with the oil wash stage because it helps keep the pigments in place for the final matte varnish.

So here are some pictures. Please leave some feedback and let me know what you think!









Competition Model 5.0 - The Home Stretch.....

I feel all productive today. Made a video. Wrote a review on some editing software. Even managed to work on a model.

I got this little guy put on his base. I really like how the cobble stones came out. I started with grey primer on the base, then dry brushed Vallejo - Grey Black. then up to Vallejo -Stone Grey. After that I used Secret Weapons Miniatures earth powders to give them a dirty street look. I still need to clean up the rim of the base after everything is dried, varnished and ready to go.

I also got the oil washes on. I used a black on the golds and most of the silvers. I needed to knock down the shine quite a bit. I then used a bright orange oil to make a rust wash, This should help with the edges and give it a washed out rust look.

Now I'm just waiting on everything to dry for a day or two (oils take patience young padawan...)

Once everything is "dry" it will be time to coat with a matte varnish then I will add some rust powders to a few spots, finish cleaning up the base and this one will be in the books!

Well you have been patiently waiting so have a bunch of pics.








Thursday, April 2, 2015

Let's enter a painting contest!

So dakkadakka.com is having a March Painting Contest. The theme is Veteran.

So naturally most people are going to go with something like a GW Space Marine. Or a Dreadnought. I want to do something out of the box and unexpected. And let's face it nobody expects the inquisition....er I mean a PP Mercenary Warjack...

I am going to be going a bit off the reservation with this one. Most of these (and the studio paint scheme) are dark brass/greens. Which are great but don't lend them selves too well to rusting chipping (not a huge leap in color difference).

I'm thinking a lighter Khaki will be the main color for him.

So here is the primed model. I'll be thinking of something for the base.








Too excited about this to want to go to work or college but alas I must.....